Toro Z Master G3 3000 Series Service Manual page 151

MOWER DECKS
7. Install the inner spacer to the spindle assembly (Fig.
423).
8. Pack the bearing with No. 2 grease and install the
bearing (Fig. 424).
6
6-14
Fig. 423 DSCN-2700a
Fig. 424
DSCN-2694a
9. Install the seal. Press it flush with the top of the
housing (Fig. 425).
Note: The open lip of the faces inward.
10. Install the bearing shield and the seal spacer onto
the spindle shaft (Fig. 426).
Toro Z Master G3 3000/5000/6000 Series Service Manual
Fig. 425 DSCN-2696a
Fig. 426 DSCN-2702a