3. Remove two screws and spacers retaining the park
brake handle assembly to the frame (Fig. 068).
Fig. 068
4. Remove the two cotter pins and clevis pins retaining
the right and left park brake cables to the handle
assembly (Fig. 069).
Fig. 069
Toro Z Master G3 3000/5000/6000 Series Service Manual
5. Remove two e-rings retaining the park brake cables
to the park-brake pivot assembly and slide the
cables out of the slots. Remove the park-brake
handle assembly from the unit (Fig. 070).
DSCN-2619a
DSCN-2623a
CHASSIS
Fig. 070
DSCN-2626a
3
3-19