Toro Z Master G3 3000 Series Service Manual page 158

3. Install the spacer in the spindle housing (Fig. 447).
Fig. 447
Toro Z Master G3 3000/5000/6000 Series Service Manual
4. Turn the spindle housing over and press the bearing
in the bottom of the housing until the bearing seats
against the spacer (Fig. 448).
DSCN-0116a
Note: The open lip of the seal should be facing
outward (Fig. 449).
MOWER DECKS
Fig. 448
Fig. 449
DSCN-0111a
6
DSCN-0112a
6-21