Mower Spindle Disassembly (2009 Model G3 Series Units) - Toro Z Master G3 3000 Series Service Manual

Mower Spindle Disassembly (2009
Model G3 Series Units)
1. Place the blade saddle in a vise.
2. Remove the nut and washer (Fig. 403).
Fig. 403
3. Remove the pulley hub and square key (Fig. 404).
Fig. 404
Toro Z Master G3 3000/5000/6000 Series Service Manual
4. Remove the bearing shield (Fig. 405).
5. Remove the spindle housing from the spindle shaft
assembly (Fig. 406).
DSCN-2669a
DSCN-2670a
MOWER DECKS
Fig. 405
Fig. 406
DSCN-2671a
6
DSCN-2672a
6-9