Toro Z Master G3 3000 Series Service Manual page 81

CHASSIS
9. Secure the LH control assembly to the frame with a
bolt and the pivot tube (Fig. 212).
3
10. Install the plug connector to the neutral switch (Fig.
213).
3-60
Fig. 212 DSCN-4473a
Fig. 213
DSCN-4500a
11. Install the wiring harness in the wire anchor located
on the LH motion control assembly (Fig. 214).
12. Install the lock nut from the damper motion control to
the LH motion control assembly (Fig. 215).
Toro Z Master G3 3000/5000/6000 Series Service Manual
Fig. 214 DSCN-4502a
Fig. 215
DSCN-4462a