CHASSIS
7. Remove screw, flat washer and nut retaining
the front pump linkage to the LH motion control
assembly (Fig. 196).
3
8. Remove the bolt securing the pivot hub and the LH
motion control to the frame (Fig. 197).
3-56
Fig. 196
DSCN-4470a
Fig. 197
DSCN-4473a
9. Remove the pivot hub from the LH motion control
(Fig. 198).
10. Remove the wire harness anchor from the LH
motion control (Fig. 199).
Toro Z Master G3 3000/5000/6000 Series Service Manual
Fig. 198
DSCN-4474a
Fig. 199
DSCN-4475