Xerox WorkCentre 5687 Series Service Manual page 1488

REP 11.23-171 BM Entry Sensor
Parts List on PL 11.161
Removal
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
WARNING
Switch off the electricity to the machine GP 14. Disconnect the power cord from the cus-
tomer supply while performing tasks that do not need electricity. Electricity can cause
death or injury. Moving parts can cause injury.
1. Open the HVF BM front door and fully pull out the BM module.
2. Remove the crease blade knob (6d), PL 11.161 Item 4.
3. Remove the crease roll handle (6c), PL 11.161 Item 5.
4. Remove the BM front cover, PL 11.161 Item 3.
5. Figure 1, remove the BM entry sensor.
Repairs/Adjustments
REP 11.23-171
August 2007
4-468 WorkCentre 5687 Family