Xerox WorkCentre 5687 Series Service Manual page 1605

REP 14.6B Scan Motor and Mounting (65-87 ppm)
Parts List on PL 14.16.
Removal
WARNING
Switch off the electricity to the machine, GP 14. Disconnect the power cord from the
customer supply while performing tasks that do not need electricity. Electricity can
cause death or injury. Moving parts can cause injury.
1. Remove the scanner top cover, REP 14.2B.
2. Remove the scanner motor cover, PL 14.16 Item 10, (2 screws).
3. Figure 1. Prepare to remove the motor.
2
Remove 3 screws
Figure 1 Preparation
4. Figure 2. Remove the motor and mounting. Note the orientation of the bracket and the
mounting.
WorkCentre 5687 Family
1
Scribe round
the bracket
Replacement
1.
2.
August 2007
4-585
1
Release the wiring and
disconnect PJ 461.
(Press the top of the PJ)
Figure 2 Motor and mounting
The replacement procedure is the reverse of the removal procedure.
Perform ADJ 14.3B Scanner Motor.
3
Remove the mount-
ing (2 screws)
2
Remove the bracket
(2 screws)
Repairs/Adjustments
REP 14.6B