Xerox WorkCentre 5687 Series Service Manual page 1241

REP 11.12-110 Paddle Wheel Shaft Assembly
Parts List on PL 11.8.
Removal
WARNING
Switch off the electricity to the machine, GP 14. Disconnect the power cord from the
customer supply while performing tasks that do not need electricity. Electricity can
cause death or injury. Moving parts can cause injury.
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
1. Remove the stapler traverse assembly, REP 11.8-110.
2. Remove the tamper assembly, REP 11.6-110.
3. Figure 1, remove the paddle motor assembly.
WorkCentre 5687 Family
1
3
Release harness
Remove 2
from retainer
screws
4
Remove motor
assembly
Figure 1 Paddle motor assembly
4. Figure 2, prepare the rear components.
August 2007
4-221
2
Disconnect 2
harnesses
Repairs/Adjustments
REP 11.12-110