Xerox WorkCentre 5687 Series Service Manual page 1454

REP 11.62-170 BM Slide Assembly
Parts List on PL 11.65
Removal
WARNING
Switch off the electricity to the machine, GP 14. Disconnect the power cord from the
customer supply while performing tasks that do not need electricity. Electricity can
cause death or injury. Moving parts can cause injury.
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
1. Remove the BM module, REP 11.61-170.
2. Remove the BM front cover, PL 11.80 Item 3.
3. Figure 1, Remove the slide assembly from the HCSS BM frame.
Repairs/Adjustments
REP 11.62-170
1
Remove screw
2
Move the slide to the rear and
remove the slide assembly
Figure 1 Remove the slide assembly
August 2007
4-434
2
1
Move the slide to
Remove screw
the rear and
remove the slide
assembly
WorkCentre 5687 Family