Xerox WorkCentre 5687 Series Service Manual page 1478

2. Figure 1, Remove the BM PWB.
Bin 2 harness
Harness retainers
BM harnesses
3
If necessary, release harnesses
from the retainers to allow the
PWB to be removed
Figure 1 PWB removal
Repairs/Adjustments
REP 11.17-171
Replacement
Figure 1, ensure the BM harness and bin 2 harness are correctly positioned in the harness
retainers so that harnesses are not damaged when the BM is moved to the extremities of its
travel.
Reverse the removal procedures to replace the BM PWB.
1
Disconnect all PJs
2
Remove 8 screws and
remove the PWB
August 2007
4-458
CAUTION
WorkCentre 5687 Family