Xerox WorkCentre 5687 Series Service Manual page 1447

Figure 2 Rear bearing movement
8. Figure 3, remove the BM paper guide assembly.
WorkCentre 5687 Family
1
Remove the
E-clip, then
the bearing.
9. Figure 4, remove the components from the BM paper guide assembly.
August 2007
4-427
1
Remove 4 screws. Discon-
nect the 2 ground harnesses.
2
Pivot the BM flapper assembly
down to rest on the crease
blade.
Figure 3 Paper guide assembly removal
3
Lift out the BM paper
guide assembly.
Repairs/Adjustments
REP 11.60-170