Xerox WorkCentre 5687 Series Service Manual page 1614

REP 14.12B Scanner PWB (65-87 ppm)
Parts List on PL 14.16
Removal
WARNING
Switch off the electricity to the machine, GP 14. Disconnect the power cord from the
customer supply while performing tasks that do not need electricity. Electricity can
cause death or injury. Moving parts can cause injury.
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
1. Remove the document glass, the CVT glass, and the CVT ramp assembly, REP 14.3B.
2. Remove the scanner PWB cover, PL 14.16 Item 9.
3. Disconnect all of the harness connectors from the scanner PWB, PL 14.16 Item 8.
4. Remove four screws securing the scanner PWB.
5. Remove the scanner PWB.
Replacement
1. The replacement procedure is the reverse of the removal procedure.
2. Perform ADJ 14.1B Optics Cleaning.
Repairs/Adjustments
REP 14.12B, REP 14.13B
REP 14.13B Scan Carriage Ribbon Cable (65-87 ppm)
Parts List on PL 14.15
Removal
Switch off the electricity to the machine, GP 14. Disconnect the power cord from the
customer supply while performing tasks that do not need electricity. Electricity can
cause death or injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
1. Remove the document glass, the CVT glass, and the CVT ramp assembly, REP 14.3B.
2. Remove the scanner PWB cover, PL 14.16 Item 9.
3. Prepare to remove the scan carriage ribbon cable, PL 14.15 Item 4.
4. Figure 1. Remove the scan carriage ribbon cable.
4
Disconnect the scan
carriage ribbon cable
3
Release two harness
retainers
Figure 1 Ribbon cable removal
5. Remove the felt protection strip from the scan carriage ribbon cable.
August 2007
4-594
WARNING
WARNING
5
Remove the scan
carriage ribbon cable
1
2
Remove the connector cover
Disconnect the scan
carriage ribbon cable
WorkCentre 5687 Family