Xerox WorkCentre 5687 Series Service Manual page 1766

PL 9.22 Xerographic Module and
Short Paper Path Assembly (32-38
ppm)
Item Part Description
1 122K02650 Erase Lamp (REP 9.9)
2 – Xerographic module (see below for
variants, see also NOTE 1 and
NOTE 3)
– 113R00705 Sold (XE)
– 113R00706 Sold (USSG/XCL)
– 113R00704 Metered (USSG/XCL/XE)
3 – Short paper path assembly (REF:
PL 10.25 Item 1)
4 130E10510 Relative humidity sensor (Q09-
365)/Ambient temperature sensor
(Q09-375)
5 960K40570 Temperature sensor (Q09-370)
6 055E54960 Erase lamp support
7 – Xerographic module latch (P/O PL
9.22 Item 18) (REP 9.6)
8 504K12310 Transfer/Detack corotron (NOTE 1)
(ADJ 9.1)
9 113K03330 Transfer/Detack harness (REP 9.8)
10 – Not used
11 – Latch spring (P/O PL 9.22 Item 18)
12 – Latch pin (P/O PL 9.22 Item 18)
13 – Latch plate (Not Spared)
14 031E11101 Developer paddle (REP 9.7)
15 809E69220 Spring
16 802E87940 Pivot plate
17 – Kurly clip (Not Spared)
18 – Developer latch pin kit (P/O PL
31.12 Item 8)
NOTE: A transfer/detack corotron (PL 9.22 Item 8) is
supplied with the xerographic module.
NOTE: For the charge scorotron and charge scoroton grid
harnesses, refer to PL 4.17.
NOTE: If a new Xerographic module has been installed,
perform ADJ 9.2.
Parts Lists
PL 9.22
August 2007
5-54 WorkCentre 5687 Family