Xerox WorkCentre 5687 Series Service Manual page 1564

UPPER LIMIT SWITCH
LOWER LIMIT SWITCH
Figure 1 Bin 1 Limit Switches
Replacement
Reverse the removal procedures to replace the Bin 1 upper and lower limit switches.
Repairs/Adjustments
REP 11.75-171, REP 11.76-171
REP 11.76-171 Bin 1 Stack Height Sensor
Parts List on PL 11.135
Removal
Take care during this procedure. Sharp edges may be present that can cause injury.
Switch off the electricity to the machine, GP 14. Disconnect the power cord from the
customer supply, while performing tasks that do not need electricity. Electricity can
cause death or injury. Moving parts can cause injury.
1. Remove the HVF front and rear covers, REP 11.1-171.
2. Disconnect the PJs and remove the sensor rear transmitter and front receiver, Figure 1.
RECEIVER
Figure 1 Bin 1 Stack Height Sensor
Replacement
Reverse the removal procedures to replace the stack height sensor transmitter and receiver.
August 2007
4-544
WARNING
WARNING
TRANSMITTER
WorkCentre 5687 Family