Xerox WorkCentre 5687 Series Service Manual page 1505

REP 11.33-171 Buffer Pocket Jam Clearance Guide
Assembly
Parts List on PL 11.153
Removal
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
WARNING
Switch off the electricity to the machine GP 14. Disconnect the power cord from the cus-
tomer supply while performing tasks that do not need electricity. Electricity can cause
death or injury. Moving parts can cause injury.
1. Remove the HVF front door, REP 11.1-171.
2. Remove the HVF top cover, REP 11.1-171.
3. Remove the HVF front cover, REP 11.1-171.
4. Remove the HVF rear cover, REP 11.1-171.
5. Figure 1. At the rear of the HVF, remove the pivot screw.
REAR VIEW
Figure 1 Rear pivot screw removal.
WorkCentre 5687 Family
Remove the rear
pivot screw
August 2007
4-485
6. Figure 2. At the front of the HVF, remove the pivot screw.
Remove the front
pivot screw
Figure 2 Front pivot screw removal.
Replacement
NOTE: After the guide has been re-installed, check that the rear pivot screw is correctly
engaged in the guide, by checking for play.
The replacement procedure is the reverse of the removal procedure.
Repairs/Adjustments
REP 11.33-171