Xerox WorkCentre 5687 Series Service Manual page 1240

REP 11.11-110 Bin 1 Level Sensors
Parts List on PL 11.12.
Removal
WARNING
Switch off the electricity to the machine, GP 14. Disconnect the power cord from the
customer supply while performing tasks that do not need electricity. Electricity can
cause death or injury. Moving parts can cause injury.
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
1. Remove the ejector assembly, REP 11.10-110.
2. Remove the stacker level sensors Figure 1.
Repairs/Adjustments
REP 11.11-110
4
Release the sensors and
disconnect harnesses.
2
Disconnect 2 connectors.
1
Remove two screws
and harness retainers.
Figure 1 Removing the stacker level sensors
Replacement
Reverse the removal procedures to replace the bin 1 level sensors.
August 2007
4-220
3
Remove 2
screws, remove
sensor support
assembly.
WorkCentre 5687 Family