Apply the grease to
both sides and the
inner edge of the
frame where the
compiler carriage
slides
Figure 6 Upper vertical slides
7.
Reinstall all removed parts.
8.
Switch on the machine, GP 14.
WorkCentre 5687 Family
HCSS Compiler Carriage Elevator Motor Worm And Gear
Parts list on: PL 11.44.
1.
Remove the HCSS rear cover, REP 11.1-130.
2.
Figure 7, use plastislip grease, PL 26.10 Item 8, to lubricate the worm and gear.
Apply the grease
to both sides and
the inner edge of
the frame where
the compiler car-
riage slides
3.
Re-install the HCSS rear cover, REP 11.1-130.
August 2007
4-607
Apply grease to the
worm and gear
Figure 7 Worm and gear lubrication
Repairs/Adjustments
ADJ 4.1