Xerox WorkCentre 5687 Series Service Manual page 1492

11. Figure 2, remove the backstop link.
2
Press down on the link and
release the rear tensioner link
Figure 2 Backstop link removal
Repairs/Adjustments
REP 11.26-171
3
Remove the link
and two springs
1
Press down on the link and
release the front tensioner link
August 2007
4-472
12. Figure 3, remove the BM backstop idler bracket assembly.
2
Remove the bracket
assembly and belt
Figure 3 Idler bracket assembly removal
1
Remove 2 screws
WorkCentre 5687 Family