Xerox WorkCentre 5687 Series Service Manual page 1139

REP 8.11 Tray 3 and Tray 4 Transport Drive Gear
Parts List on PL 8.30
Removal
WARNING
Switch off the electricity to the machine, GP 14. Disconnect the power cord from the
customer supply while performing tasks that do not need electricity. Electricity can
cause death or injury. Moving parts can cause injury.
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
1. Remove the rear cover, PL 7.25 Item 1.
2. Remove the tray 3 and 4 transport motor, REP 8.10.
3. Remove the tray 3 and 4 transport motor bracket, Figure 1.
WorkCentre 5687 Family
2
Remove the bracket with the
drive gear and the drive belt
Figure 1 Tray 3 and 4 transport motor bracket
August 2007
4-119
1
Remove 2 screws
Repairs/Adjustments
REP 8.11