Xerox WorkCentre 5687 Series Service Manual page 1509

6. Figure 2, remove the front blade support.
Figure 2 Front support removal
WorkCentre 5687 Family
7. Figure 3, remove the rear blade support.
4
Remove front
blade support
3
Remove E-clip
2
Release the front
connecting rod
and bearing
1
Remove E-clip
Do not loosen the three red screws that surround the lower support guides
August 2007
4-489
3
Remove E-clip
2
Release the rear
connecting rod
and bearing
1
Remove E-clip
Figure 3 Rear support removal
CAUTION
Repairs/Adjustments
REP 11.36-171
4
Remove rear
blade support