Xerox WorkCentre 5687 Series Service Manual page 1692

Loosen 2 clamp screws so
that the anvil can move freely,
see note
Figure 2 Loosening the anvil
NOTE: Take great care not to drop the anvil, spacer or clamp plate, Figure 3, as they can
fall to the bottom of the BM module. If parts need to be retrieved from the bottom of the
BM module it may be necessary to tilt the whole HVF BM to make the loose parts slide to
the centre of the base, from where they can be easily removed.
Repairs/Adjustments
ADJ 11.3-171
August 2007
4-672 WorkCentre 5687 Family