Table of Contents
Advertisement
ADJ 7.2 Tray 5 Paper Tray Guide Setting
Parts List on PL 7.64
Purpose
To adjust the paper tray guides in tray 5 for A4 / A3 or 8.5 x 11 / 11 x 17 inch paper.
Adjustment
WARNING
Switch off the electricity to the machine, GP 14. Disconnect the power cord from the
customer supply while performing tasks that do not need electricity. Electricity can
cause death or injury. Moving parts can cause injury.
1.
Open tray 5 door and allow the tray to lower and remove the paper stack.
2.
Adjust the paper guide to the required paper size, Figure 1.
•
To set the paper tray guide to A4 / A3 paper size, move the paper guide to the outer
position.
•
To set the paper tray guide to 8.5 x 11 / 11 x 17 inch paper size, move the paper
guide to the inner position.
3.
Check the registration, refer to dC604 Registration Setup Procedure.
WorkCentre 5687 Family
Figure 1 Paper guide adjustment
August 2007
4-629
Paper size indicator window
1
Move the handle up to
release the lock on the
paper guide
2
Use the handle to move the
paper guide to the required
paper size.
3
Move the handle down to
lock the paper guide
Repairs/Adjustments
ADJ 7.2
Hide quick links:
Advertisement
Chapters
Table of Contents
