Figure 10 Pivots, shutter and pins lubrication
3.
Re-install the CC shutter, REP 11.53-170.
WorkCentre 5687 Family
Apply grease to
the pivot and the
pin
Apply grease to
the pivot and
Apply grease to
the pin
the inside sur-
face of the track
Apply grease
to the inside
surface of the
track
HCSS BM Bin 1 Tray (HCSS and HCSS BM) Bin 2 Tray (HCSS)
Parts list on: PL 11.52 (HCSS bin1), PL 11.54 (HCSS bin2), PL 11.78 (HCSS BM bin1).
1.
Remove the lower tray support, part of REP 11.35-130 or REP 11.46-170.
2.
Figure 11, use plastislip grease, PL 26.10 Item 8, to lubricate the lower tray support.
Apply grease
to the inside
walls of the
recess
Figure 11 Lower tray support lubrication
August 2007
4-609
Apply grease
to four bosses
Repairs/Adjustments
ADJ 4.1