Xerox WorkCentre 5687 Series Service Manual page 1433

3
Remove the
cover
2
Slide the cover to the rear
to align with the notch
Figure 2 Cover removal
4. Figure 3, remove the nip shaft, nip springs and nip rolls.
WorkCentre 5687 Family
1
Remove 2 screws
3
Slide the rolls off
the shaft
Replacement
Reverse the removal procedure to replace the nip shaft, nip springs and nip rolls.
August 2007
4-413
2
Lift out the nip shaft
with rolls
Figure 3 Nip shaft removal
Repairs/Adjustments
REP 11.54-170
1
Remove 2
springs