Xerox WorkCentre 5687 Series Service Manual page 1669

ADJ 11.1-120 1K LCSS Bin 1 Level
Parts List on PL 11.106
Purpose
To ensure bin 1 is level, and achieve the best stacking performance.
Adjustment
WARNING
Switch off the electricity to the machine, GP 14. Disconnect the power cord from the
customer supply while performing tasks that do not need electricity. Electricity can
cause death or injury. Moving parts can cause injury.
1. Remove the bin 1 elevator motor, refer to REP 11.5-120.
2. Move bin 1 to the lowest position.
3. Slacken the screw on each belt clamp and adjust the position they sit on the belts to level
the tray. Lock the clamps.
4. Re-install the bin 1 elevator motor, refer to REP 11.5-120.
5. Switch on the machine, GP 14.
6. Enter dC330, code 11-033, Bin 1 Elevator Motor Cycle. Check that bin 1 cycles without
giving any fault indications.
WorkCentre 5687 Family
August 2007
4-649
Repairs/Adjustments
ADJ 11.1-120