Xerox WorkCentre 5687 Series Service Manual page 1566

REP 11.79-171 TF Exit Sensor
Parts List on PL 11.197
Removal
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
WARNING
Switch off the electricity to the machine, GP 14. Disconnect the power cord from the
customer supply, while performing tasks that do not need electricity. Electricity can
cause death or injury. Moving parts can cause injury.
1. Remove the Tri Folder top cover, REP 11.67-171.
2. Disconnect the PJs and remove the exit sensor, Figure 1.
Figure 1 Tri Folder Exit Sensor
Replacement
Reverse the removal procedures to replace the exit sensor.
Repairs/Adjustments
REP 11.79-171, REP 11.80-171
Exit Sensor
August 2007
4-546
REP 11.80-171 Tri Folder PWB
Parts List on PL 11.193
Removal
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
WARNING
Switch off the electricity to the machine, GP 14. Disconnect the power cord from the
customer supply, while performing tasks that do not need electricity. Electricity can
cause death or injury. Moving parts can cause injury.
1. Remove Tri Folder rear cover, REP 11.67-171.
2. Disconnect the PJs and remove the PWB, Figure 1.
Figure 1 Tri Folder PWB
Replacement
Reverse the removal procedures to replace the Tri Folder PWB.
WorkCentre 5687 Family