Xerox WorkCentre 5687 Series Service Manual page 1734

PL 5.35 Input Tray Assembly
Item Part Description
1 050K60430 Input tray assembly (complete) (32-
38 ppm) (REP 5.4)
– 050K67464 Input tray assembly (complete) (45-
87 ppm) (REP 5.4)
2 004K00971 Pad
3 031E08720 Restack arm
– 031E11310 Restack arm (Alternate)
4 – Input tray (P/O PL 5.35 Item 1, PL
5.35 Item 18)
5 023E25420 Feed motor drive belt (ADJ 5.1)
6 059K50920 Takeaway roll assembly (REP 5.6),
Exit roll assembly (32-55 ppm)
(REP 5.13)
7 125E00430 Static eliminator (small) (REP 5.17)
8 130E11500 DADH Length sensor 1 (Q05-315)/
DADH Length sensor 2 (Q05-320)
(REP 5.9)
– 130E12320 DADH Length sensor 1 (Q05-315)/
DADH Length sensor 2 (Q05-320)
(REP 5.9) (Alternate)
9 – Lower cover (right) (P/O PL 5.35
Item 18) (45-87 ppm)
10 115K02160 Static eliminator (large)
11 103K01510 Document width sensor (Q05-325)
(REP 5.16, ADJ 5.3)
12 – Bearing (P/O PL 5.35 Item 1, PL
5.35 Item 18)
13 014E61020 Spacer (black)
14 – Spacer (white) (P/O PL 5.35 Item 1,
PL 5.35 Item 18)
15 – Pulley (P/O PL 5.35 Item 1, PL 5.35
Item 18)
16 – Sensor bracket (P/O PL 5.35 Item
1, PL 5.35 Item 18)
17 059K43920 Takeaway roll assembly (REP 5.6),
Exit roll assembly (45-87 ppm)
(REP 5.13)
18 – Input tray assembly (complete) (45-
87 ppm) (REP 5.14)
19 130E11200 Document present sensor (Q05-
310) (45-87 ppm)
20 – Lower cover (Left) (P/O PL 5.35
Item 18) (45-87 ppm)
21 – Lower cover (P/O PL 5.35 Item 1)
(32-38 ppm)
NOTE: If a new part is installed into the input tray, or a new
input tray is installed, perform ADJ 5.3.
Parts Lists
PL 5.35
August 2007
5-22 WorkCentre 5687 Family