Suzuki WagonR+ RB310 Service Manual page 1617

Table of Contents

Advertisement

3E-10 REAR SUSPENSION
14) Remove axle housing.
INSTALLATION
Install removed parts in reverse order of removal, noting the fol-
lowing.
1) Place rear axle housing on floor jack. Then install rear trail-
ing arm bolts (1) (right & left) in proper direction as shown.
Then tighten nuts (2) temporarily by hand.
A : Vehicle out side
B : Vehicle center side
2) Install coil springs (3) (right & left) on spring seat (2) of axle
housing (1) and raise axle housing.
NOTE:
When seating coil spring (3), mate spring end with
stepped part (4) of rear axle spring seat as shown.
A : Upper side
"a" : Small
"b" : Large
3) Install shock absorber (1) (right and left) to axle housing (2)
and install bolts in proper direction as shown. Then tighten
bolts (3) (right & left) temporarily by hand.

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Wagonr+ rb4130Wagonr+ rb413

Table of Contents