Intermediate Shaft - Suzuki WagonR+ RB310 Service Manual

(A)

Intermediate shaft

DISASSEMBLY
1) Remove reduction drive oil seal and snap ring, and then
drive out intermediate shaft.
2) Drive out intermediate shaft right bearing (1) from intermedi-
ate shaft by using bearing puller and hydraulic press.
3) Remove reduction drive gear oil seals (1) by using hydraulic
press and special tools.
Special tool
(A) : 09924-84510-005
(B) : 09913-75821
Transfer output retainer assembly
DISASSEMBLY
1) Uncaulk flange nut.
2) Remove flange nut while holding flange (1) by using special
tool.
Special tool
(A) : 09930-40113
1
3) Remove flange (1) by special tool.
Special tool
(A) : 09913-60910
TRANSFER 7D-9