Suzuki WagonR+ RB310 Service Manual page 1610

Rear Axle Shaft and Wheel Bearing
REMOVAL
1) Hoist vehicle and remove rear wheels.
2) Remove rear brake drum by using 8 mm bolts. For details
referring to Section 5C.
1. 8 mm bolt
3) Drain gear oil from rear axle housing by loosening drain plug
(1).
2. Level plug
4) Disconnect parking brake cable from parking brake shoe
lever (2) and remove parking brake cable (1) from brake back
plate.
5) Disconnect brake pipe (1) from wheel cylinder and put wheel
cylinder bleeder plug cap (2) onto pipe to prevent fluid from
spilling.
6) Remove wheel speed sensor from axle housing (if equipped
with ABS).
7) Remove brake back plate bolts from axle housing.
REAR SUSPENSION 3E-3