Avaya Definity SI Maintenance Manual page 39

How to use the Maintenance book
a. The report can be restricted by typing either y (yes) or n (no) in
b. The Cabinet, Port Network Board Number, Port and Category fields
3. After you have made your choices to tailor the report, press
The alarm log displays.
Port Maintenance On
Name
01C1008 DID-TRK
Screen 1-2. Alarm Report screen
A DID trunk port in slot 10, carrier C has a MAJOR alarm.
4. Note the value in the Port field (01C1008). This is the alarmed port
address.
5. Type display errors and press
A query screen appears, where you can chose to see all the errors or
restrict the list to certain kinds of errors. Except for warning levels (Major,
Minor, Warning), the screen is the same as
Unless you suspect a problem occurred within a certain time frame or with
a particular component of the system, press
display the accumulated system errors
Port Mtce Alt
Name Name
01C1008 DID-TRK
Screen 1-3. Hardware Error Report - Active Alarms
6. Note Error Type (Err Type field) (1547) and Aux Data, if present.
555-233-123
these fields (shown above in bold):
Active
Major
Minor
Warning
!
CAUTION:
If you choose n for major alarms and y for minor and warning
alarms, you will not see the macro-level information that you
may need to determine what is wrong with the system.
are described in the ''Field descriptions''
ALARM REPORT
Alt Alarm Svc
Brd? Name Type State
y MAJOR
HARDWARE ERROR REPORT - ACTIVE ALARMS
Err Aux First
Type Data Occur
1547 03/09/00:20 03/15/01:18 255 1
section.
Ack? Date Date
1 2 Alarmed Resolved
03/09/00:30 00/00/00:00
.
Enter
Screen 1-1 on page
at the query screen to
Enter
(Screen 1-3).
Last Err Err Rt/ Al Ac
Occur Cnt Rt Hr
7
Issue 4 May 2002
.
Enter
1-2.
St
a y
1-3