Web Configurator Networked Av Mode; Poe - ZyXEL Communications XGS2220 Series User Manual

1.1.5 Web Configurator Networked AV Mode

Aside from the Web Configurator in Standard mode, you can switch to Networked AV mode that is
specifically designed to simplify configuration and management of the Switch for AVoIP (Audio-Video
over Internet Protocol) application. In AV over IP, the AV transmitter is the transmitter, the AV receiver is
the receiver, and the matrix switch is a standard IP Switch. See
using the Setup Wizard screen for configuring the Switch's Networked AV mode's basic and advanced
settings.
Figure 3 Comparison Between Traditional AV and AVoIP Setups

1.1.6 PoE

The Switch is a Power Sourcing Equipment (PSE) because it provides a source of power through its
Ethernet ports. Each device that receives power through an Ethernet port is a Powered Device (PD).
The Switch can adjust the power supplied to each PD according to the PoE standard the PD supports.
PoE standards are:
• IEEE 802.3af Power over Ethernet (PoE)
• IEEE 802.3at Power over Ethernet (PoE) +
• IEEE 802.3bt Power over Ethernet (PoE) ++
The following table describes the PoE features of the Switch by model.
Table 4 XGS2220 Series Models and PoE Features
POE FEATURES
IEEE 802.3at PoE+
IEEE 802.3bt PoE++
Power Management Mode
PoE Power Budget
Chapter 1 Getting to Know Your Switch
XGS2220-30HP
Ports 1 – 16
Ports 17 – 26
Consumption
Classification (default)
400 W
XGS2220 Series User's Guide
34
Section 4.4 on page 66
XGS2220-54HP
Ports 1 – 40
Ports 41 – 50
Consumption
Classification (default)
600 W
for details on
XGS2220-54FP
Ports 1 – 40
Ports 41 – 50
Consumption
Classification (default)
960 W