Ping; Traceroute; Figure 29-6 Show Mac Address-Table Command Example; Figure 29-7 Ping Command Example - ZyXEL Communications Dimension GS-3012F User Manual

Dimension GS-3012F Gigabit Ethernet Switch
29.2.6 show mac address-table
Syntax:
show mac address-table <all <sort>|static>
Where
= Specifies the sorting criteria (MAC, VID or port).
<sort>
This command displays the MAC address(es) stored in the switch. The following example shows a static MAC
address table.
GS-3012F# show mac address-table static
Vid
1 01:a0:c5:aa:aa:aa
GS-3012F#

29.3 ping

Syntax:
ping <ip> < [in-band|out-of-band|vlan <vlan-id> ] [ size <0-8024> ] [ -
t ]>
where
<ip>
[in-band|out-of-
band|vlan <vlan-
id> ]
[ size <0-
8024> ]
[ -t ]
This command sends Ping packets to an Ethernet device. The following example sends Ping requests to and
displays the replies from an Ethernet device with an IP address of 192.168.1.100.
GS-3012F# ping 192.168.1.100
sent rcvd
1 1
2 2
3 3
GS-3012F#

29.4 traceroute

29-4
Mac Port
1

Figure 29-6 show mac address-table Command Example

= The IP address of an Ethernet device.
= Specifies the network interface or the VLAN ID to which the Ethernet
device belongs.
out-of-band
other ports on the switch.
= Specifies the packet size to send.
=
Sends Ping packets to the Ethernet device indefinitely. Click
to terminate the Ping process.
C
rate rtt avg
100 0 0
100 0 0
100 0 0

Figure 29-7 ping Command Example

Status
Permanent
refers the management port while
mdev max min
0 0 0
0 0 0
0 0 0
in-band
reply from
192.168.1.100
192.168.1.100
192.168.1.100
Command Examples
means the
[CTRL]+