Igmp Snoop Disable Command; Igmp Filter Commands; Igmp Filter Show Command; Igmp Filter Set Command - ZyXEL Communications IES-1248-71 User Manual

Chapter 50 IGMP Commands

50.2.3 IGMP Snoop Disable Command

Syntax:
ras> switch igmpsnoop disable
This command turns off IGMP proxy or snooping.
The following example sets the device to not use IGMP proxy or snooping.

Figure 184 IGMP Snoop Disable Command Example

ras> switch igmpsnoop disable

50.3 IGMP Filter Commands

Use the IGMP filter commands to define IGMP filter profiles and assign them to ADSL ports.
IGMP filter profiles allow you to control access to IGMP multicast groups. You can have a
service available to a specific IGMP multicast group. You can configure an IGMP filter profile
for an IGMP multicast group that has access to a service (like a SIP server for example). Then
you can assign the IGMP filter profile to ADSL ports that are allowed to use the service.

50.3.1 IGMP Filter Show Command

Syntax:
ras> switch igmpfilter show [portlist]
where
[portlist]
This command displays which IGMP filter profile an ADSL port(s) is using.
The following example displays which IGMP filter profile ADSL port 9 is using.

Figure 185 IGMP Filter Show Command Example

ras> switch igmpfilter show 9
port
--------------------------------------
9

50.3.2 IGMP Filter Set Command

Syntax:
ras> switch igmpfilter set [<port>|*] <name>
where
[<port>|*]
<name>
336
You can specify a single ADSL port <1>, all ADSL ports <*> or
=
a list of ADSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
profile
DEFVAL
You can specify a single ADSL port <1> or all ADSL ports <*>.
=
The name of an IGMP filter profile.
=
IES-1248-71/73 User's Guide