Igmp Filtering Profile - ZyXEL Communications XS1930-12HP User Manual

Table 93 Advanced Application > Multicast > IPv4 Multicast > IGMP Snooping > IGMP Snooping VLAN
LABEL
Clear
Index
Name
VID
Delete
Cancel

24.3.3 IGMP Filtering Profile

An IGMP filtering profile specifies a range of multicast groups that clients connected to the Switch are
able to join. A profile contains a range of multicast IP addresses which you want clients to be able to
join. Profiles are assigned to ports (in the IGMP Snooping screen). Clients connected to those ports are
then able to join the multicast groups specified in the profile. Each port can be assigned a single profile.
A profile can be assigned to multiple ports.
Click Advanced Application > Multicast > IPv4 Multicast in the navigation panel. Click the IGMP
Snooping link and then the IGMP Filtering Profile link to display the screen as shown.
Figure 142 Advanced Application > Multicast > IPv4 Multicast > IGMP Snooping > IGMP Filtering Profile
The following table describes the labels in this screen.
Table 94 Advanced Application > Multicast > IPv4 Multicast > IGMP Snooping > IGMP Filtering Profile
LABEL
Profile Name
Start Address
Chapter 24 Multicast
DESCRIPTION
Click Clear to reset the fields to the factory defaults.
This is the index number of the IGMP snooping VLAN entry in the table. Click on an index
number to view more details or change the settings.
This field displays the descriptive name for this VLAN group.
This field displays the ID number of the VLAN group.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Check the entry(ies) that you want to remove, then click the Delete button.
Click Cancel to clear the check boxes.
DESCRIPTION
Enter a descriptive name for the profile for identification purposes.
To configure additional rule(s) for a profile that you have already added, enter the profile
name and specify a different IP multicast address range.
Type the starting multicast IP address for a range of multicast IP addresses that you want to
belong to the IGMP filter profile.
XS1930 Series User's Guide
201