Operation Check - Canon imageRUNNER ADVANCE C3325 Series Service Manual

Operation Check

NOTE:
• Connect the memory media to the USB Port, and perform the operation check.
• When [System Manager Information Settings] is set, it is required to log in as a system
manager in accordance with instructions from the user administrator.
■ Writing Check
1) Check that "Memory Media" is set to ON in [Settings/Registration] > [Preferences] > [Display
Settings] > [Store Location Display Settings]. When it is set to OFF, set it to ON, and
execute [Settings/Registration] > [Apply Set. Chng.] according to the display.
2) Set [Settings/Registration] > [Function Settings] > [Store/Access Files] > [Memory Media
Settings] > [Use Scan/Print Functions] to ON.
3) Execute [Settings/Registration] > [Apply Set. Chng.] according to the display.
4) Mount the Memory Media to the Multimedia Card Reader/Writer. (Check that the Mount
Mark is indicated in the bottom right.)
9
Installation > USB Device Port-E4 > Operation Check > Writing Check
F-9-205
9 Installation > USB Device Port-E4 > Operation Check > Writing Check
5) Make the following selection:[Scan and Store] > [Memory Media] > [Memory Media (A)]
6) Set originals to DADF (or Copyboard Cover), and press the [Scan] button. Then, press the
Start button on the Control Panel.
9-84
F-9-206
F-9-207
9-84