Canon imageRUNNER ADVANCE C3325 Series Service Manual page 726

COPIER > OPTION > NETWORK
SSL30 ON/OFF of SSL 3.0
Lv.2 Details To set whether to use SSL 3.0 with the installed machine.
Set the value to 0 when not using SSL 3.0 because of security
concern.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 1
8
Service Mode > COPIER > OPTION > CUSTOM
T-8-55
8 Service Mode > COPIER > OPTION > CUSTOM
■ CUSTOM
COPIER > OPTION > CUSTOM
TEMP-TBL Set fixing control temp:plain 1, colored
Lv.1 Details To set the offset of fixing control temperature for plain paper 1 (64 to
75 g/m2) and colored paper.
As the value is changed by 1, the control temperature is changed by 5
deg C.
Increase the value when a fixing failure occurs, and decrease the
value when fixing offset occurs.
Use case When a fixing failure/fixing offset occurs on plain paper 1 and colored
paper
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and press
OK key.
Display/adj/set range -2 to 2
-2: -10 deg C, -1: -5 deg C, 0: 0 deg C, 1: +5 deg C, 2: +10 deg C
Unit - deg C
Default value 0
SC-L-CNT Set large paper jdgmt reference at scan
Lv.1 Details To set the criteria for the scan counter to count which paper size
whether B4 or LTR as large size.
The threshold is determined by the combination with the setting of B4-
L-CNT.
SC-L-CNT=0, B4-L-CNT=0: paper exceeding B4 is determined as
large size, paper with B4 or smaller is determined as small size.
SC-L-CNT=0, B4-L-CNT=1: paper with B4 or larger is determined as
large size, paper smaller than B4 is determined as small size.
Use case As needed
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: B4 size, 1: LTR size
Default value 0
Related service mode COPIER> OPTION> USER> B4-L-CNT
ABK-TOOL Allow access from address book mntc tool
Lv.1 Details To set whether to accept import from the address book maintenance
tool.
Use case When executing import from the address book maintenance tool
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Prohibited, 1: Allowed
Default value 0
Supplement/memo Address book maintenance tool: Tool provided from CMJ.
8-175
8-175