Canon imageRUNNER ADVANCE C3325 Series Service Manual page 925

7) Install the HDD in the HDD Case.
• 4 Screws (Use the screws removed in step 2.)
CAUTION:
• Be careful not to drop the HDD.
• Place the HDD with the label side facing up and the connector oriented as shown in
the figure.
9
Installation > TYPE-3: HDD Data Encryption Kit/ Removable HDD Kit Installation Procedure > Installation Procedure > Installing the Removable H
8) Affix the HDD Warning Label in the appropriate language, aligning the label with the Rib.
9) Write down the serial number of the host machine to the R-HDD Label, and affix it to the
F-9-327
4x
F-9-328
9 Installation > TYPE-3: HDD Data Encryption Kit/ Removable HDD Kit Installation Procedure > Installation Procedure > Installing the Removable H
CAUTION:
Be sure to affix the HDD Warning Label in the direction as shown in the figure.
space on the top of the HDD.
CAUTION:
• Be sure to write down the serial number on the R-HDD Label in order to show
from which machine it was removed and prevent it from being installed to another
machine.
• Be sure to affix it on a flat surface.
Serial No.
9-137
XXXXXXXX
Rib
9-137