Canon imageRUNNER ADVANCE C3325 Series Service Manual page 686

COPIER > OPTION > FNC-SW
SJOB-CL Set of scan job canceling by logout
Lv.1 Details To set whether to cancel the scan job in operation by logout of the
user.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Job after the completion of scanning operation cannot be canceled.
Display/adj/set range 0 to 2
0: Cancel only scan job in waiting state, 1: Cancel all scan jobs, 2: Not
canceled
Default value 0
Supplement/memo Scan job: A job after the scanning operation is completed.
MIBCOUNT Set of charge counter MIB scope range
Lv.2 Details To set the range of counter information that can be obtained as MIB
(Management Information Base).
Use case For customization
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 2
0: All charge counters are obtained, 1: Only the displayed counter* is
obtained, 2: All charge counters are not obtained
*: Counter specified by the following: COPIER> OPTION> USER>
COUNTER 1 to 6
Default value 0
Related service mode COPIER> OPTION> USER> COUNTER1 to 6
CNTR-SW Init parts counter estimated life value
Lv.1 Details To return the estimated life value of parts counter to the initial value.
Use case Upon user's request
Adj/set/operate method 1) Enter 0, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0: Returned to the initial value
Default value 0
PSWD-SW Set password type to enter service mode
Lv.1 Details To set the type of password to enter when getting into service mode.
There are two types of password: password for "service technician"
and password for "system administrator + service technician".
When "system administrator + service technician" is set, enter the
password for system administrator at the user's site followed by
password for service technician.
Use case Upon request from the user who concerns security
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 2
0: No password, 1: Service technician, 2: System administrator +
service technician
Default value 0
8
Service Mode > COPIER > OPTION > FNC-SW
8 Service Mode > COPIER > OPTION > FNC-SW
COPIER > OPTION > FNC-SW
SM-PSWD Set of password for service technician
Lv.2 Details To set password for service technician that is used when getting into
service mode.
Use case When password is required to get into service mode
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Be sure to set 1 or 2 with PSWD-SW in advance.
Display/adj/set range 1 to 99999999
Default value 11111111
Related service mode COPIER> OPTION> FNC-SW> PSWD-SW
RPT2SIDE Set of report 1-sided/2-sided output
Lv.1 Details To set whether to output the service mode report as 1-sided or 2-sided
printing.
Use case When making 1-sided report output
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: 1-sided, 1: 2-sided
Default value 1
Related service mode COPIER> FUNCTION> MISC-P> P-PRINT
BRWS-FAV Set to allow serv browser favorite reg
Lv.2 Details To set whether to allow registration of favorites in the browser for
servicing.
When 1 is set, favorites in the browser for servicing can be edited, and
any URLs can be accessed.
Use case When accessing to any URLs
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Prohibited, 1: Allowed
Default value 0
STND-PNL [Not used]
INVALPDL Disabling of PDL license
Lv.1 Details To disable the registered PDL license.
When 1 is set, PDL is disabled even if a PDL license has been
registered. Make this setting to the machine installed at convenience
stores, which do not allow PDL to be used
Use case When prohibiting the use of PDL
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Enabled, 1: Disabled
Default value 0
8-135
8-135