Canon imageRUNNER ADVANCE C3325 Series Service Manual page 662

■ MISC
COPIER>ADJUST>MISC
SEG-ADJ Setting of criteria for text/photo
Lv.1 Details To set the judgment level of text/photo original in Text/Photo/Map
mode.
As the value is increased, the original tends to be detected as a
photo document, and as the value is decreased, the original tends to
be detected as a text document.
Use case When adjusting the classification level of text and photo in Text/
Photo/Map mode
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -4 to 4
Default value 0
K-ADJ Setting of criteria for black text
Lv.1 Details To set the judgment level of black characters at text processing.
As the value is larger, the text tends to be detected as black.
Use case When preferring the text to be judged as black
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -3 to 3
Default value 0
ACS-ADJ Set criteria for B&W/color in ACS mode
Lv.1 Details To set the judgment level of B&W/color original in ACS mode.
As the value is increased, the original tends to be detected as a
B&W document, and as the value is decreased, the original tends to
be detected as a color document.
Use case When adjusting the color recognition level in ACS mode
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -3 to 3
Default value 0
ACS-EN Setting of judgment area in ACS mode
Lv.2 Details To set the judgment area in ACS mode.
As the value is larger, the judgment area is widened.
Use case When adjusting the judgment area in ACS mode
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -2 to 2
Default value 1
8
Service Mode > COPIER > ADJUST > MISC
8 Service Mode > COPIER > ADJUST > MISC
COPIER>ADJUST>MISC
ACS-CNT Set jdgmt pixel count area in ACS mode
Lv.2 Details To set the area where the pixel is counted to judge the color
presence in ACS mode.
As the value is larger, the judgment area is widened.
Use case When adjusting the area where the pixel is counted to judge the
color presence in ACS mode
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -2 to 2
Default value 0
ACS-EN2 Set ACS mode jdgmt area in DADF mode
Lv.2 Details To set the judgment area in ACS mode at DADF reading.
As the value is larger, the judgment area is widened.
Use case When adjusting the judgment area in ACS mode at DADF reading
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -2 to 2
Default value 1
ACS-CNT2 Set ACS jdgmt pixel count area in DADF
Lv.2 Details To set the area where the pixel is counted to judge the color
presence in ACS mode at DADF reading.
As the value is larger, the judgment area is widened.
Use case When adjusting the area where the pixel is counted to judge the
color presence in ACS mode at DADF reading
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -2 to 2
Default value 0
SH-ADJ Adjustment of sharpness
Lv.1 Details To adjust the sharpness of image at copyboard reading/stream
reading that is set in Settings/Registration menu.
As the value is larger, the image gets sharper.
If the value is too large, moire is likely to occur in an output image of
COPY and SEND.
Use case When moire occurs frequently on images of COPY and SEND output
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -3 to 3
Default value 0
Related user mode Adjustment/Maintenance> Adjust Image Quality> Sharpness
8-111
T-8-31
8-111