Canon imageRUNNER ADVANCE C3325 Series Service Manual page 371

■ Enabling■This■Function ■
● Overview ■
Since■network■packet■data■includes■customer■information,■this■function■is■not■available■by■
default.■To■use■this■function,■it■needs■to■be■activated■as■a■license■option■as■well■as■service■
mode■needs■to■be■enabled.
When■enabling■this■function,■make■sure■to■first■explain■it■to■the■customer■and■obtain■their■
approval.
● Procedure■for■Enabling■This■Function ■
The■procedure■for■enabling■this■function■is■indicated■below.
1)■Enter■a■license■in■the■following■menu■to■enable■network■capture.
[■Settings/■Registration■]■>■[■Management■Settings■]■>■[■License/■Other■]■>■[■Register■License■]
2)■Enable■the■setting■(ON)■in■the■following■menu.
[■Settings/■Registration■]■>■[■Preferences■]■>■[■Network■]■>■[■Store■Network■Packet■Log■]
3)■Set■"1"■in■the■following■service■mode.
•■ (Level2)■COPIER■>■Test■>■NET-CAP■>■CAPOFFON
The■function■is■now■enabled.
6
Troubleshooting■>■Debug■Log■>■Network■Packet■Capture■>■Initial■Settings
F-6-42
6 Troubleshooting■>■Debug■Log■>■Network■Packet■Capture■>■Initial■Settings
■ Initial■Settings ■
● Overview ■
When■the■network■capture■function■has■been■enabled/started,■specify■the■initial■settings■
before■performing■network■capture.
● Setting■the■Overwrite■Function ■
To■enable■this■function,■set■"1"■in■the■following■service■mode.
•■ (Level2)■COPIER■>■Test■>■NET-CAP■>■OVERWRIT
NOTE:
When■the■HDD■space■becomes■full■after■starting■the■capture,■the■oldest■file■is■deleted■
and■the■captured■data■continues■to■be■saved;■therefore,■it■is■necessary■to■set■"1:■
Overwrite"■in■advance.
The■following■shows■the■machine■behavior■when■the■HDD■space■reaches■full.
•■ When■the■overwriting■setting■is■ON
•■ The■oldest■packet■file■is■deleted.■The■oldest■file■is■determined■by■the■last■update■time■
of■the■file■(not■by■the■date■and■time■attached■to■the■file).
•■ When■the■HDD■space■reaches■full■during■packet■collection,■the■oldest■file■is■deleted■to■
continue■collecting■packet■data■to■the■currently-stored■file.
•■ CAPSTATE■of■capturing■continues■to■be■"RUNNING".
•■ When■the■overwriting■setting■is■OFF
•■ Capturing■is■stopped.
•■ CAPSTATE■of■capturing■becomes■"HDDFULL".■Note■that■STT-STP■remains■as■start■
state■(1).■Capturing■is■started■again■by■changing■the■value■from■STT-STP■(0)■to■STT-
STP■(1).
•■ If■the■HDDFULL■state■is■cleared■when■starting■capturing■again,■capturing■is■started.
•■ CAPSTATE■of■capturing■becomes■"RUNNING".
•■ If■the■HDDFULL■state■is■not■cleared,■starting■data■capturing■results■in■an■error.
•■ CAPSTATE■of■capturing■remains■as■"HDDFULL".
•■ When■a■command■of■stopping■data■capturing■is■given■during■the■"HDDFULL"■state,■
CAPSTATE■of■capturing■remains■as■"STOP".
6-38
6-38