Canon imageRUNNER ADVANCE C3325 Series Service Manual page 743

COPIER>OPTION>CST
C4-K-SW Set of EXEC/16K size support: Cassette 4
Lv.2 Details To set whether to support EXEC or 16K size (K-size paper) by the
Cassette 4.
This setting is enabled only for the location where K-size paper can be
selected in the Control Panel menu. For other locations, only EXEC
can be set.
Use case Upon user's request
Adj/set/operate method Enter the setting value, and then press OK key.
Caution When K-size paper cannot be selected in the Control Panel menu,
only the setting value 0 can be set.
Display/adj/set range 0 to 1
0: EXEC, 1: 16K
Default value 0
Supplement/memo 16K paper: 270 x 195 mm
8
Service Mode > COPIER > OPTION > INT-FACE
T-8-58
8 Service Mode > COPIER > OPTION > INT-FACE
■ ACC
COPIER>OPTION>ACC
COIN Setting of charge management
Lv.1 Details To set charge management method.
Use case At installation of Coin Manager
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Following items are automatically specified when changing the value
to 3 (from 0 to 2) when setting 3. The change will not be returned even
if changing back the value to 0 to 2 (from 3) once the mode has been
changed.
- COPIER> OPTION> USER> CONTROL, AFN-PSWD=1
- COPIER> OPTION> NETWORK> DA-CNCT=1
- COPIER> OPTION> DSPLY-SW> UI-BOX, UI-SEND, UI-FAX=0
- IE Settings> IE Function Priority=ON
- Preferences> Network> TCP/IP Settings> IPv4 Settings> IP Address
Range Settings> RX/Print Range: Allow IPv4 Address=ON
- Preferences> Network> TCP/IP Settings> IPv6 Settings> IP Address
Range Settings> RX/Print Range: Allow IPv6 Address=ON
- Preferences> Network> TCP/IP Settings> FTP Print Settings> Use
FTP Printing=OFF
- Preferences> Network> TCP/IP Settings> IPP Print Settings=ON
- Preferences> Network> SMB Server Settings> SMB Printer
Settings> Use SMB=ON
- Function Settings> Send> E-mail/I-Fax Settings> Communication
Settings> SMTP Receive, POP=OFF
Following items are automatically specified when changing the value
to 4 (from 0 to 2) when setting 4. The change will not be returned even
if changing back the value to 0 to 2 (from 4) once the mode has been
changed.
- COPIER> OPTION> USER> AFN-PSWD=1
- COPIER> OPTION> DSPLY-SW> UI-BOX, UI-SEND, UI-FAX, UI-
RSCAN, UI-EPRNT, UI-HOLD=0
- Management Settings> Device Management> Display Log=OFF
Display/adj/set range 0 to 7
0: No charge
1: Charge with Coin Manager
2: Charge with remote counter
3: Charge with DA (only in Japan)
4: Charge with this machine itself
5: New SC mode
6: External charge mode 6
7: External charge mode 7
Default value 0
Related service mode COPIER> OPTION> USER> CONTROL
COPIER> OPTION> DSPLY-SW> UI-BOX, UI-SEND, UI-FAX
COPIER> OPTION> ACC> PDL-THR
8-192
8-192