Canon imageRUNNER ADVANCE C3325 Series Service Manual page 756

COPIER>TEST>PG
COLOR-M Setting of M-color output at test print
Lv.1 Details To set whether to output M-color at the time of test print.
The setting is applied to all types.
When setting COLOR-M to 1 and COLOR-Y/C/K to 0, a single
M-color is output.
Use case At test print
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 1
0: Not output, 1: Output
Default value 1
Related service mode COPIER> TEST> PG> COLOR-Y/C/K
COLOR-C Setting of C-color output at test print
Lv.1 Details To set whether to output C-color at the time of test print.
The setting is applied to all types.
When setting COLOR-C to 1 and COLOR-Y/M/K to 0, a single
C-color is output.
Use case At test print
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 1
0: Not output, 1: Output
Default value 1
Related service mode COPIER> TEST> PG> COLOR-Y/M/K
COLOR-K Setting of Bk-color output at test print
Lv.1 Details To set whether to output Bk-color at the time of test print.
The setting is applied to all types.
When setting COLOR-K to 1 and COLOR-Y/M/C to 0, a single Bk-
color is output.
Use case At test print
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 1
0: Not output, 1: Output
Default value 1
Related service mode COPIER> TEST> PG> COLOR-Y/M/C
F/M-SW Setting of PG full color/single color
Lv.1 Details To set whether to output PG in full color or single color.
Use case When identifying the cause whether it's due to full color or single
color
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 1
0: Full color, 1: Single color
Default value 0
8
Service Mode > COPIER > TEST > PG
8 Service Mode > COPIER > TEST > PG
COPIER>TEST>PG
PG-PICK Setting of test print paper source
Lv.1 Details To set the paper source at the time of test print output.
Use case At problem analysis
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 1 to 8
1: Cassette 1, 2: Cassette 2, 3: Cassette 3, 4: Cassette 4, 5: Multi-
purpose Tray, 6 to 8: Not used
Default value 1
2-SIDE Set of 1-sided/2-sided print for PG
Lv.1 Details To set whether to output the PG as 1-sided or 2-sided printing.
Use case At problem analysis
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 1
0: 1-sided, 1: 2-sided
Default value 0
PG-QTY Setting of PG output quantity
Lv.1 Details To set the number of sheets for PG output.
Use case At problem analysis
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 1 to 999
Unit 1 sheet
Default value 1
8-205
T-8-62
8-205