Canon imageRUNNER ADVANCE C3325 Series Service Manual page 928

14) Secure the Power Cable connected to the HDD Slot with the Cable Guide.
CAUTION: Position to install the Cable
Be sure to connect the Power Cable in a way such that its extra length is approx. 40
mm.
approx. 40 mm
CAUTION:
Be sure to route the Power Cable along the bottom of the concave of the Cable Guide.
1x
9
Installation > TYPE-3: HDD Data Encryption Kit/ Removable HDD Kit Installation Procedure > Installation Procedure > Installing the Removable H
15)
F-9-334
9 Installation > TYPE-3: HDD Data Encryption Kit/ Removable HDD Kit Installation Procedure > Installation Procedure > Installing the Removable H
Secure the Signal Cable connected to the HDD Slot with the Cable Guide.
CAUTION: Position to install the Cable
Be sure to connect the Signal Cable in a way such that its extra length is approx. 30
mm.
approx. 30 mm
CAUTION:
Do not allow extra cable at the [A] part in the figure shown below.
1x
9-140
F-9-335
[A]
F-9-336
9-140