Canon imageRUNNER ADVANCE C3325 Series Service Manual page 741

COPIER>OPTION>USER
SJ-CLMSK ON/OFF secured job stop button display
Lv.2 Details To set whether to display the button to stop a secured job.
When 0 is set, the stop button is displayed.
When COIN is set to 6 or 7 (charge mode: Type-C), set 1. Since the
stop button is not displayed, the secured job cannot be stopped.
Use case When prohibiting to stop the secured job in charge mode Type-C
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF (Display), 1: ON (Hide)
Default value 0
Related service mode COPIER> OPTION> ACC> COIN
PRTDP-SW Set delivery side for 1-page job:2-sided
Lv.1 Details To set whether to deliver paper face-up or face-down when printing
only 1 page although 2-sided print is set.
When 0 is set, paper is delivered face-down like 1-sided job. (Paper
does not pass through the Duplex Path.)
When 1 is set, paper is delivered face-up via the Duplex Path. Paper
feed distance becomes longer so productivity is decreased.
Use case When changing the delivery side of 1-page print although 2-sided print
is set
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Face-down delivery, 1: Face-up delivery
Default value 0
PDFD-MSW Set output paper size: direct print PDF
Lv.2 Details To set output paper size at direct print PDF.
Usually, the region defined by MediaBox is output. However, in some
cases, the region defined (trimmed) by CropBox is judged as output
paper size depending on PDF file.
Set 1 when output result differs from what is defined at direct print
PDF.
Use case When preferring to output a PDF file with paper which size is defined
by CropBox while rectangle sizes defined by MediaBox and CropBox
are different
(e.g.: when preferring to output a PDF file with A4 size paper while A3
and A4 are defined by MediaBox and CropBox respectively, etc.)
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 1
0: MediaBox (Normal), 1: CropBox
Default value 0
8
Service Mode > COPIER > OPTION > ACC
8 Service Mode > COPIER > OPTION > ACC
COPIER>OPTION>USER
SFT-OUT Setting of offset priority delivery
Lv.2 Details To set whether to deliver a job where offset and collate/offset group is
set to the delivery destination with offset function.
When 1 is set, a job is delivered to the delivery destination with offset
function even though a delivery destination without offset function is
set in Settings/Registration menu.
Use case When preferring to deliver a job to the delivery destination with offset
function
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Based on Output Tray Settings, 1: Priority on job settings (deliver to
a delivery destination where offset is possible)
Default value 0
Related user mode Function Settings> Common> Paper Output Settings> Output Tray
Settings
FMTMH2M [For customization]
8-190
T-8-57
8-190