Canon imageRUNNER ADVANCE C3325 Series Service Manual page 929

16) Install the Encryption Board.
• 4 Screws (TP; M3x6)
CAUTION:
Install the screws in the order from (1) to (4).
4x
TP
M3x6
17) Connect the Power Cable and Signal Cable to the Encryption Board.
• 2 Connectors
2x
9
Installation > TYPE-3: HDD Data Encryption Kit/ Removable HDD Kit Installation Procedure > Installation Procedure > Installing the Removable H
18)
19)
F-9-337
F-9-338
9 Installation > TYPE-3: HDD Data Encryption Kit/ Removable HDD Kit Installation Procedure > Installation Procedure > Installing the Removable H
Pass the Power Cable and Signal Cable through the hole in the HDD Frame.
Secure the Power Cable and Signal Cable in place using the Wire Saddle.
1x
9-141
F-9-339
F-9-340
9-141