Canon imageRUNNER ADVANCE C3325 Series Service Manual page 904

4) Secure the Power Cable (270 mm; A: HDD-Pow1) and the Signal Cable (250 mm; A: HDD-
Sig) included in the package with the Cable Guid.
CAUTION 1: Installing the cables
Be sure to install it in the orientation shown in the figure.
CAUTION 2: Position to install the Power Cable (270 mm; A: HDD-Pow1) and the
Signal Cable (250 mm; A: HDD-Sig).
Be sure to install each Cable in the position shown in the figure.
approx. 30 mm
approx. 40 mm
9
Installation > TYPE-1: HDD Data Encryption Kit Installation Procedure > Installation Procedure > Installing the HDD Data Encryption Kit-C9
F-9-275
F-9-276
9 Installation > TYPE-1: HDD Data Encryption Kit Installation Procedure > Installation Procedure > Installing the HDD Data Encryption Kit-C9
1x
5) Pass the Power Cable (270 mm; A: HDD-Pow1) and the Signal Cable (250 mm; A: HDD-
Sig) through the hole in the HDD Frame, and then connect them to the HDD.
• 2 Connectors
9-116
F-9-277
2x
F-9-278
9-116