Canon imageRUNNER ADVANCE C3325 Series Service Manual page 693

■ DSPLY-SW
COPIER > OPTION > DSPLY-SW
UI-COPY ON/OFF of copy screen display
Lv.2 Details To set whether to display the copy function.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 1
UI-BOX ON/OFF of Inbox screen display
Lv.2 Details To set whether to display the Inbox function.
The setting value1 and 2 of this item are linked with the values (ON
and OFF) of Store Location Display Settings> Main Box in Settings/
Registration menu respectively. The setting is reflected after turning
OFF/ON the power.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 2
0: OFF (No Inbox function. Storing is not available even with PDL to
Inbox.)
1: ON (Inbox function is active.)
2: ON (Storing is available with PDL to Inbox although no display on
the Control Panel/remote UI.)
Default value 1
Related user mode Preferences> Display Settings> Store Location Display Settings> Mail
Box
UI-SEND ON/OFF of Send screen display
Lv.2 Details To set whether to display the SEND function.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 1
UI-FAX ON/OFF of fax screen display
Lv.2 Details To set whether to display the fax function.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 1
8
Service Mode > COPIER > OPTION > DSPLY-SW
8 Service Mode > COPIER > OPTION > DSPLY-SW
COPIER > OPTION > DSPLY-SW
T-LW-LVL Set toner level warning mssg dspl timing
Lv.2 Details To set the threshold value for the toner level in the Toner Bottle.
When the toner level becomes below the threshold while TNR-WARN
is 0, a warning message "Toner is low. Replacement not yet needed."
is displayed on the Control Panel.
As the value is incremented by 1, the threshold is increased by 1%. As
the value is larger, the timing to display the message becomes earlier.
Use case - Upon user's request
- At the timing that the service technician visits to the customer, etc.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution If you set a value smaller than the default value, absence of toner may
be displayed before the toner level warning message.
Display/adj/set range 5 to 100
Unit 1 %
Default value It differs according to the location.
Related service mode COPIER> OPTION> DSPLY-SW> TNR-WARN
NWERR-SW OFF/ON of network-related error display
Lv.2 Details To set OFF/ON of network-related error message display.
When setting 0 while the machine is not connected to network, the
network-related error message "Check the network connection." is not
displayed.
Use case When using the machine only as a copy machine
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 1 (Normal model)/0 (Self-operated copy model)
FXMSG-SW ON/OFF Fixing Unit replacement message
Lv.2 Details To set whether to display the message prompting to replace the Fixing
Unit on the Control Panel when the counter for life judgment reaches
the specified value.
When the setting values of FXMSG-SW and FXWRNLVL are 1, the
Fixing Unit life detection is performed.
When the Fixing Unit reaches its life, the Fixing Unit replacement
message "Prepare new fixing roller. Call service representative." is
displayed.
Use case When detecting the life of Fixing Unit
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 1
Related service mode COPIER> OPTION> FNC-SW> FXWRNLVL
8-142
8-142