Canon imageRUNNER ADVANCE C3325 Series Service Manual page 625

COPIER>ADJUST>COLOR
LD-OFS-M Adj M low dens area clr balance: copy
Lv.2 Details To adjust the color balance of the low density area of M-color for copy
operation.
As the value is larger, the image gets darker.
A value obtained by adding the value adjusted in [Fine Adjust Density]
in the main menu to the setting value of this item is applied as the
actual density value.
e.g.: When the value of this item is "-4" and the value of [Fine Adjust
Density] is "5", the density value is "1".
Note that the density value must be within the rage from -8 to 8.
e.g.: When the value of this item is "7" and the value of [Fine Adjust
Density] is "5", the density value is "8".
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -8 to 8
Default value 0
Related user mode Copy> Options> Color Balance> Fine Adjust Density
Access Stored Files> Mail Box> Print> Change Print Settings>
Options> Color Balance> Fine Adjust Density
Supplement/memo In the main menu, different density values can be set for copy
operation and file storage. Although the setting value of this item is just
one value, the density may differ for copy operation and file storage.
LD-OFS-C Adj C low dens area clr balance: copy
Lv.2 Details To adjust the color balance of the low density area of C-color for copy
operation.
As the value is larger, the image gets darker.
A value obtained by adding the value adjusted in [Fine Adjust Density]
in the main menu to the setting value of this item is applied as the
actual density value.
e.g.: When the value of this item is "-4" and the value of [Fine Adjust
Density] is "5", the density value is "1".
Note that the density value must be within the rage from -8 to 8.
e.g.: When the value of this item is "7" and the value of [Fine Adjust
Density] is "5", the density value is "8".
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -8 to 8
Default value 0
Related user mode Copy> Options> Color Balance> Fine Adjust Density
Access Stored Files> Mail Box> Print> Change Print Settings>
Options> Color Balance> Fine Adjust Density
Supplement/memo In the main menu, different density values can be set for copy
operation and file storage. Although the setting value of this item is just
one value, the density may differ for copy operation and file storage.
8
Service Mode > COPIER > ADJUST > COLOR
8 Service Mode > COPIER > ADJUST > COLOR
COPIER>ADJUST>COLOR
LD-OFS-K Adj Bk low dens area clr balance: copy
Lv.2 Details To adjust the color balance of the low density area of Bk-color for copy
operation.
As the value is larger, the image gets darker.
A value obtained by adding the value adjusted in [Fine Adjust Density]
in the main menu to the setting value of this item is applied as the
actual density value.
e.g.: When the value of this item is "-4" and the value of [Fine Adjust
Density] is "5", the density value is "1".
Note that the density value must be within the rage from -8 to 8.
e.g.: When the value of this item is "7" and the value of [Fine Adjust
Density] is "5", the density value is "8".
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -8 to 8
Default value 0
Related user mode Copy> Options> Color Balance> Fine Adjust Density
Access Stored Files> Mail Box> Print> Change Print Settings>
Options> Color Balance> Fine Adjust Density
Supplement/memo In the main menu, different density values can be set for copy
operation and file storage. Although the setting value of this item is just
one value, the density may differ for copy operation and file storage.
MD-OFS-Y Adj Y mid dens area clr balance: copy
Lv.2 Details To adjust the color balance of the medium density area of Y-color for
copy operation.
As the value is larger, the image gets darker.
A value obtained by adding the value adjusted in [Fine Adjust Density]
in the main menu to the setting value of this item is applied as the
actual density value.
e.g.: When the value of this item is "-4" and the value of [Fine Adjust
Density] is "5", the density value is "1".
Note that the density value must be within the rage from -8 to 8.
e.g.: When the value of this item is "7" and the value of [Fine Adjust
Density] is "5", the density value is "8".
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -8 to 8
Default value 0
Related user mode Copy> Options> Color Balance> Fine Adjust Density
Access Stored Files> Mail Box> Print> Change Print Settings>
Options> Color Balance> Fine Adjust Density
Supplement/memo In the main menu, different density values can be set for copy
operation and file storage. Although the setting value of this item is just
one value, the density may differ for copy operation and file storage.
8-74
8-74